Chemicals

ArcelorMittal Gent carbon-capture trial reports over 90% CO2 capture from blast furnace gas

The first phase used MHI’s Advanced KM CDR Process and will inform assessment of full-scale application at the Gent blast furnace.

Nadia SorensenNovember 2, 20265 min read2 views

A conceptual illustration of an integrated steelworks carbon-capture pilot, with a capture module linked to blast furnace gas piping and rolling-mill infrastructure in the background.

A carbon-capture trial at ArcelorMittal’s integrated steelmaking site in Gent, Belgium, has completed its first phase after demonstrating pilot-scale capture of carbon dioxide from blast furnace gas at rates exceeding 90%. The trial used Mitsubishi Heavy Industries’ Advanced KM CDR Process and was conducted by ArcelorMittal, MHI, BHP Group and Mitsubishi Development.

According to the partners, the first phase produced operational and engineering data that will support assessment of a future full-scale application at the Gent blast furnace. Assessments based on the trial results indicate that applying the technology at full scale to pre-combustion blast furnace off-gas could reduce CO2 intensity at the Gent site by up to 24%. If applied across multiple emission points in the steelmaking plant, the approach could support progress toward near-zero emissions intensity, the partners said.

Test conditions and scope

Phase 1 involved more than 4,500 hours of operational testing and focused on capturing CO2 from a proportion of the blast furnace off-gas. The trial sought to demonstrate the technical feasibility of applying MHI’s capture technology in the steel sector, including at facilities such as the Gent site, where unburnt process gas carries dust, sulfur-containing compounds and other contaminants.

Blast furnace off-gas contains significant concentrations of CO2 and carbon monoxide. In this phase, only CO2 was captured. The remaining carbon content, in the form of CO, can be used for power and heat generation elsewhere at an integrated steelmaking plant, with CO2 released upon combustion.

Second phase to broaden testing

The next phase aims to broaden application of carbon capture across multiple emission points in the steelmaking process. It includes testing the technology on gases from the hot strip mill reheating furnace, which is fired with gas and heats thick steel slabs to the temperature required for rolling into thin sheets.

The reheating furnace uses a blend of by-product gases from steelmaking—coke oven gas, blast furnace off-gas and basic oxygen furnace gas—together with natural gas, representing another capture point within integrated steelmaking operations. Phase 2 will assess MHI’s technology under a different and more dynamic flue-gas profile, providing further data on integrating carbon capture across multiple emission points or processes. The results are expected to inform updated engineering and deployment studies for future full-scale applications.

Partner roles and comments

ArcelorMittal is facilitating the trial in Gent. MHI is providing its proprietary Advanced KM CDR Process and leading carbon-capture process engineering and technical evaluation. BHP and MDP, key suppliers of high-quality steelmaking raw materials to ArcelorMittal’s European operations, are providing funding.

Frederik Van De Velde, CEO of ArcelorMittal Belgium, said the partners set out to better understand how carbon capture can be incorporated into existing steel plants. He described the first stage’s outcome as successful, said scaling up needed technologies is the next step, and added that the blast furnace gas trial has provided important data.

Tatsuto Nagayasu, senior vice president and head of CCUS at MHI, said completing more than 4,500 hours of operation and demonstrating capture rates above 90% from blast furnace gas marked an important milestone. He said the campaign showed the process could operate under challenging blast furnace gas conditions, including dust, sulfur-containing compounds and other impurities, while generating data for commercial-scale design assessment.

Dr. Ben Ellis, vice president of marketing sustainability at BHP, said the results are promising and demonstrate the abatement potential of the blast furnace and integrated steelmaking route. He noted that around 70% of global steel production comes from blast furnace steelmaking today and that the route is expected to remain important for decades, making emissions reduction from the process critical while alternate pathways are developed.

Tadashi Mizuno, managing director and CEO of MDP, said the positive phase 1 results strengthened confidence that carbon capture applied to blast furnace gas could provide a viable emissions-reduction pathway for the steel sector. He added that energy-efficiency improvements and high-quality raw materials will continue to matter in the near to medium term, while technologies such as CCUS could contribute significantly to long-term decarbonization.