Rubber & Plastic Products

Iron-Pillared Clay Lifts Oil Yield from Automotive Plastic Pyrolysis to 68%, Without Shifting Diesel-Range Composition

Catalytic pyrolysis of plastics recovered from end-of-life vehicles more than doubled average oil yield versus thermal pyrolysis, yet density and viscosity still exceeded diesel specifications.

Bram OosterhuisOctober 14, 20265 min read9 views

A cutaway concept view of a laboratory pyrolysis reactor receiving shredded automotive plastic, with condensed amber fuel collecting in a glass vial beside iron-modified clay granules.

Researchers have characterized plastic waste recovered directly from end-of-life vehicles (ELVs) and tested an iron-modified pillared clay as a low-cost pyrolysis catalyst, finding that catalytic pyrolysis lifted average oil yield to roughly 68%, compared with 41% for thermal pyrolysis alone. The catalyst had far less influence on the composition of the resulting oil, however, leaving temperature as the main lever over product quality.

Pyrolysis thermally decomposes plastics at elevated temperatures in the absence of oxygen, breaking polymer chains into liquid, gaseous and solid products. It has drawn attention as a route to recover fuels and chemicals from waste polymers, and earlier work showed that common automotive plastics such as low-density polyethylene (LDPE), high-density polyethylene (HDPE) and polypropylene (PP) can be converted into hydrocarbons at relatively high yields.

Feedstock taken from vehicle components

Much of the existing research has examined automotive shredder residue, a heterogeneous mixture of plastics, metals, textiles and other materials. That leaves less information about how plastics recovered from specific components such as dashboards, bumpers and headlamps behave, and automotive plastic waste (APW) can also carry mineral fillers, flame retardants, fiberglass and other additives that affect degradation and product composition.

In the study, the researchers characterized plastics recovered directly from ELVs rather than relying on mixed shredder residue. The feedstock contained acrylonitrile butadiene styrene (ABS), HDPE, LDPE, PP, polystyrene (PS) and fiberglass, alongside substantial volatile and ash fractions. Front and rear bumpers accounted for 86.6% of the sample by weight, while fiberglass, used to reinforce automotive parts, contributed to the relatively high ash content.

A lower-cost catalyst route

Catalysts can improve pyrolysis by accelerating reactions, altering product distributions and potentially reducing the required temperature or residence time. Commercial zeolites have been widely studied, but lower-cost clay-based alternatives are attracting growing interest. Among these, pillared clays modified with metals such as iron, titanium or zirconium have shown potential to raise liquid yields and influence the formation of fuel-range hydrocarbons. Iron-modified clays are considered attractive because they may improve oil production without relying on more expensive commercial catalysts.

Rather than using bentonite clay in its original form, the researchers modified it through iron pillaring. The process introduces iron species into the clay structure, changing characteristics such as surface acidity and pore structure that can steer pyrolysis reactions.

Yield gains, limited compositional shift

The team compared thermal and catalytic pyrolysis across temperatures of roughly 350°C to 521°C and catalyst loadings of about 6% to 34% by weight, using a statistical experimental design to evaluate the interaction between temperature and catalyst concentration.

The catalyst strongly affected liquid yield. Catalytic pyrolysis produced an average oil yield of approximately 68%, against 41% for thermal pyrolysis alone. The highest oil yield, 78.6%, was reached at about 416°C with a catalyst loading of roughly 24%.

Composition behaved differently. Both thermal and catalytic pyrolysis produced similar proportions of hydrocarbons in the C8–C24 range associated with gasoline- and diesel-range compounds. In other words, the catalyst helped convert more of the plastic feedstock into liquid product but did not substantially shift that liquid toward a higher share of diesel-range molecules.

Temperature had the greater effect on product composition. Lower pyrolysis temperatures favored diesel-range organics, while temperatures above 450°C yielded a heavier, waxier oil.

Properties versus diesel specifications

The resulting pyrolysis oil showed several properties comparable to commercial diesel. The researchers reported a calorific value of 49.85 MJ/kg, a flash point of 113°C and total aromatics of 3.55% by area — values within or comparable to the ranges specified for conventional fuels. Branched heptenes and heptanes dominated the oil, compounds also identified in earlier studies of polypropylene and automotive-plastic pyrolysis.

Not every property met diesel specifications. Both density and viscosity exceeded the limits typically specified for diesel fuel, which the researchers attributed partly to heavier, long-chain hydrocarbon fractions remaining in the oil. Additional processing could therefore be required before the oil could serve as a diesel-range fuel. The team suggested approaches such as distillation and centrifugation, and optimizing reaction conditions through lower temperatures and longer residence times, to reduce heavier fractions and improve fuel properties.

Path to wider application

The study positions pyrolysis as a technically promising route for recovering value from automotive plastics, while highlighting the further development needed before broader commercial application. Future work could investigate different iron concentrations in the catalyst, improve reactor designs and heat transfer, and combine pyrolysis with downstream distillation to separate gasoline- and diesel-range fractions.

Improved collection and sorting of automotive plastics will also matter. Without systematic removal and classification of plastic components from end-of-life vehicles, reliable data on the volume and composition of available automotive plastic waste remain limited. Better information on these waste streams would help researchers and recyclers assess feedstock availability and plan potential industrial-scale pyrolysis operations.