KraussMaffei Extrusion has developed a continuous single-stage extrusion process, called PVC InlineMixing, for making PVC roofing membranes. The system is positioned as an alternative to the conventional two-stage route in which a separate hot-cold mixer produces a dryblend before the material is plasticized in a twin-screw extruder and formed into membrane. According to KraussMaffei, the new process can cut energy consumption and energy costs by up to 75 percent, depending on the formulation, system parameters and location, while shortening production time and creating the conditions for a rapid return on investment.
Direct feeding replaces a separate mixing step
In the established process, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer combination. The resulting dryblend is cooled, stored and later fed to a twin-screw extruder. PVC InlineMixing removes that separate mixing, cooling and intermediate storage sequence. Solid and liquid components are instead fed directly into the extruder through gravimetric dosing systems in the required proportions. Because the material is heated only once, the company says energy use falls; the need to invest in a separate heating-cooling-mixing combination is also eliminated. KraussMaffei lists lower space requirements, labor costs and maintenance costs as further consequences, since wear parts for the heating-cooling mixer are no longer required. The combination of lower capital expenditure and lower operating costs is intended to improve overall cost-effectiveness and support a quick payback.
Formulation changes during operation
The continuous layout also changes how formulations are handled. KraussMaffei says formula adjustments and color changes can be made directly during operation through the integrated control system, without the time-consuming preparation and interim storage of separate dryblend batches. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the approach offers roofing membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing, allowing them to respond faster to new requirements and adjust formulations during production while reducing energy and capital expenditure.
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65; KraussMaffei says the combination of high torque and large free volume provides a wide process window for different formulations. Tests confirmed what the company describes as excellent gelation of the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations.
Reference line runs at 1,800 kg/h
PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders, continuously processing PVC, additives, fillers and the resulting edge trimmings directly into finished membranes. Bartel said the results demonstrate the process's potential for industrial roofing membrane production; at the Technology Center, KraussMaffei works with customers to test specific formulations under production-relevant conditions and optimize the process before industrial implementation. The company presents the process as a way to combine high product quality with a leaner production route, yielding more cost-effective and flexible membrane manufacturing.
