Instruments & Meters

SinceVision Adds Wide-Spot Laser Displacement Sensor for Rough-Surface Measurement

The SGI-N030W combines an expanded laser spot with paired-sensor synchronisation to target battery electrode, semiconductor and precision assembly work.

Saira QureshiNovember 17, 20265 min read3 views

Two sensor heads mounted above and below a moving coated foil web on a rigid gantry, with an elongated laser spot projected across the surface.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor built for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The device extends the company's SGI Series and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required.

The design targets a known weakness of conventional point-spot laser sensors. Because those systems concentrate reflected laser energy on a small area, microscopic scratches, grain boundaries, brushed textures and matte finishes can produce signal variations that are read as dimensional change. SinceVision says such artefacts can trigger false defect warnings and force additional inspection.

Wide spot as a signal-averaging strategy

The SGI-N030W collects reflected light across a broader surface area using optical triangulation, averaging localised microscopic peaks and valleys before the signal is converted. According to the company, this reduces the influence of surface roughness and optical scattering, giving more stable displacement readings on drawn metals, sandblasted surfaces and coated battery foils.

Specified performance

The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions, and linearity of ±0.02% of full scale across the range. Sampling runs at 50 kHz, an update interval of 20 µs. Interfaces include RS485, 100Base-TX Ethernet and switchable analogue outputs at 4–20 mA or 0–10 V. Master-slave synchronisation lets two heads work in opposition, measuring from either side of a component or moving material.

Paired sensors for electrode thickness

The lead application is in-line thickness measurement of lithium-ion battery electrodes, where coating thickness and uniformity affect energy density, internal resistance and cell stability. SinceVision contrasts its approach with offline contact micrometers and drop indicators, which it says can introduce operator variability and deform wet or uncured electrode material, and with periodic spot checks that cannot cover an entire production reel.

In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. Each head measures its clearance to the material, and a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. SinceVision reports production trials holding repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate provides longitudinal resolution for detecting localised coating agglomerations, edge thinning and exposed substrate before the electrode reaches cell winding.

Semiconductor and motion applications

In semiconductor manufacturing, the company points to wafer position verification, edge detection, height measurement and checks on wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems, where non-contact operation matters for sensitive surfaces. In precision assembly, the sensor can track voice coil motors, linear actuators and micro-steppers; the sampling rate supports capture of transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot. Position data can be sent to machine control over Ethernet for real-time monitoring.

Surface texture as a recurring error source

Jack Li, SinceVision's global sales and marketing director, said false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. Conventional point-beam sensors, he said, can interpret microscopic scratches and rough coatings as actual thickness variation, slowing production lines and creating manual inspection work. The SGI-N030W's expanded spot is intended to average out those variations, with head-to-head synchronisation supporting high-speed thickness verification.